Installation instructions for MultiVOIP 130 software vs 1.09

   <Caution> 

   MultiVOIP's
   Uninstall Solution 
   Product Update
   PN: 82010180 Rev. A
   02/16/04

   Before uninstalling any old versions of MultiVOIP software,
   install the new MultiVOIP Software provided for this readme.


1. Run "MultiVOIP configuration" from your old version of MultiVOIP
   software and take note of the current settings. Your MultiVOIP 
   will be reset to factory defaults during this upgrade.

2. Run mvp10908.exe to unzip the install files. The install files will be
   unzipped to the directory C:\mvp109.

3. Go to the folder C:\MVP109\disk1 and run setup.exe to install the
   software to the pc. Accept the default installation folder and program
   group name. When prompted, select the comm. port that you will use with 
   the MultiVOIP.  Click "No" when asked if you would like to run
   configuration.

4. Connect the MVP130 to the PC comm. port and power it on.
   When the boot light if off, go to step 5.

5. Run Start->Programs->MultiVOIP 1.09->Upgrade Software.
   The voip will respond with "upgrade will reboot the multivoip" Click OK.
   Next you will be prompted with a choice to retain the current settings
   or download factory defaults.  Select the appropriate option and then
   click OK.  The firmware will take a few minutes to load.  When the
   boot light goes out, the firmware loading has finished.

6. Run Start->Programs->MultiVOIP 1.09->Configuration and
   configure the MultiVOIP for your application.

7. Uninstall your old version of MultiVOIP software by selecting the
   "Uninstall" option from the program group. 

8. The upgrade is complete.

FTP upgrade instructions.

1. Determine the version of firmware which is currently running on your MultiVoIP. 
    This can be obtained by looking under configuration/system information, via the GUI or WEB/Java. 

2a. If version x.05 or greater, ftp the file "mvpt1ftp.bin" from C:\Program Files\Multi-Tech Systems\MultiVOIP 1.09
2b. WEB/Java to the MultiVoIP and check configuration/system information and confirm firmware version as 1.09.08. 
Note: The firmware version may display as 1.07.08 or 1.06.08 instead of 1.09.08, when FTP is performed, this is OK,
.08 is the identifier. 

Or

3a. If version x.04 or earlier, ftp the file "mvpt1ftp.bin" from C:\mvp109\smooth file for ftp upgrade.
3b. Then ftp file "mvpt1ftp.bin" from C:\Program Files\Multi-Tech Systems\MultiVOIP 1.09.
3c. WEB/Java to the MultiVoIP and check configuration/system information and confirm firmware version as 1.09.08. 
Note: The firmware version may display as 1.07.08 or 1.06.08 instead of 1.09.08 when FTP is performed, this is OK,
.08 is the identifier. 


Note: You will be able to manage and configure the voip with WEB interface
using a Java plug in for the browser. You can retrieve vs. 1.4.02.01 from 
our ftp server at ftp://ftp.multitech.com/MultiVoip/Misc/java/j2re-1_4_2_01/
After installing, reboot your PC.